home page

ELTEX ITALIA s.r.l. - Costruzioni Elettriche
Via Carducci, 13 - 06061 Castiglione del Lago (PG) - ITALY
Tel:+39 0759652722 - Fax:+39 0759652696
Internet:http://eltexitalia.com - Email:eltex@eltexitalia.com


Models TE110-TE111
In conformity with the EN55015 - EN61046 - EN61047 norms

All our models are low profile electronic transformers that can be easily installed even in very narrow difficult spaces.

They are connected to the system by means of two terminal boards equipped with cable clip and protection device; the latter will prevent any type of accident due to distraction.

The micro-controller technology used in these electronic transformers makes them safe, reliable products; in fact, they can operate in difficult environments without suffering any kind of damage.

Technical Specification

  • Power supply: 230Vac ± 10%
  • Frequency: 50/60Hz
  • Power factor: 0.98
  • Ambient temperature: from -10°C to +60°C
  • Test temperature (tc) 80°
  • Weight 115 g.
  • Dimensions 168x43x20
  • Output: 12V +8% -10%
  • Load from 0 to 75W (TE110) - from 0 to 105W (TE111)
Class II insulation For assembly on wooden furniture
Independent transformer Safety low voltage transformer
For use in environments where there is a fire hazard In conformity with the norms on radio disturbance

up
PRICE LIST

Models TE112-TE113
In conformity with the EN55015 norms

Models TE112 and TE113 are a new concept of electronic transformers that, thanks to their micro-controller technology, can operate in difficult environments without suffering any damage and will continue to guarantee top performance as time goes by.

Technical Specification

  • Power supply: 230Vac ± 10%
  • Frequency: 50/60Hz
  • Power factor: 0.97
  • Ambient temperature: from -10°C to +60°C
  • Test temperature (tc) 80°
  • Weight 188 gr. (TE112) - 208 gr. (TE113)
  • Dimensions 133x50x39
  • Output: 12V +8% -10%
  • Load from 0 to 150W (TE112) - from 0 to 200W (TE113)
Class II insulation For assembly on wooden furniture
Independent transformer In conformity with the norms on radio disturbance
For use in environments where there is a fire hazard

up
PRICE LIST

Models TE101-TE102-TE104-TE105-TE106-TE107

Electronic transformer suitable for low voltage (12V) halogen lamps, to be installed on false ceilings or on furniture.

The technology used gives high performance, low consumption and an almost non-existent noise level. A safety terminal board is supplied for connection to the electrical system.

We advise using output wires with a cross-section size of at least 0.5mm² for every 50W.

Technical Specification

  • Power supply: 230Vac ± 10%
  • Frequency: 50/60Hz
  • Power factor: 0.97
  • Ambient temperature: from -10°C to +60°C
  • Test temperature (tc) 80°
  • Weight 115 gr.
  • Output: 12V +8% -10%
   
Model  Power  Dimensions  Note
TE101 from 20 to 60 W 100x46x27  
TE102 from 35 to 105 W 100x46x37  
TE104 from 20 to 60 W 100x46x27 Adjustable with dimmer RE
TE105 from 35 to 105 W 100x46x37 Adjustable with dimmer RE
TE106 from 20 to 60 W 100x46x27 Cheap model
TE107 from 35 to 105 W 100x46x37 Cheap model
Class II insulation Independent transformer
In conformity with the norms on radio disturbance

up
PRICE LIST

Models TE108-TE109
In conformity with the EN55015 norms

Models TE112 and TE113 are a new concept of electronic transformers that, thanks to their micro-controller technology, can operate in difficult environments without suffering any damage and will continue to guarantee top performance as time goes by.

Technical Specification

  • Power supply: 230Vac ± 10%
  • Frequency: 50/60Hz
  • Power factor: 0.97
  • Ambient temperature: from -10°C to +60°C
  • Test temperature (tc) 80°
  • Weight 188 gr. (TE108) - 208 gr. (TE109)
  • Dimensions 133x50x39
  • Output: 12V +8% -10%
  • Load from 75 to 150W (TE108) - from 75 to 200W (TE109)
Class II insulation In conformity with the norms on radio disturbance

up
PRICE LIST

Copyright © 1996-2025 ELTEX ITALIA s.r.l. 
Realization:
TrasiNet Web Service & Multimedia - Web Master:trasinet@trasinet.com